The design intent of these garnishes is to give a new aerodynamic feeling to the existing "faux" plastic grills that are flat and blocked off. These new garnishes extend forward at the bottom of the bumper and result in a very aggressive look to the FK8 while retaining the stock front bumper!
Material / Process: 2X2 Twill Carbon Fiber with fiberglass backing vacuum bagged with a gloss clearcoat finish. 1mm material thickness.
Please note: these garnishes fit into the OEM bumper fascia and are trimmed to fit around the OEM front intercooler and it's brackets. The driver side garnish has more trimming than the passenger side due to the off-center fitment of the intercooler. These garnishes were not designed to work with any sensors. If you need/want these to work with sensors you will need to do that on your end. If this bothers you then consider this before choosing to order.
Due to the nature of composite parts and the complexity of the design, some minor trimming/sanding may be required. However these are to be of very high quality with many hours of R&D testing.
PLEASE NOTE: I highly recommend that you follow the instructions and secure the grill tabs in at least 2 locations if not more. Many customers opt to install with no security (zip ties or small hardware). If you drive over potholes or large puddles of rain, you can risk the grill falling out and getting damaged.